All products
Noshok 3510 Series 3-Valve Differential Pressure Manifold Valves Soft Seat (0.375″ Orifice)
$212.50
20
People watching this product now!
3510 Series 3-Valve Differential Pressure Manifold Valves
Soft Seat (0.375″ Orifice)
3510 Series 3-Valve Differential Pressure Manifold Valves
Soft Seat (0.375″ Orifice)
- Designed for use with differential pressure transmitters incorporating
two isolation valves and an equalizing valve in differential pressure
measurement - Available in block, single flange, or double flange connection for remote
or direct installation - 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
and reliability - Soft seat design has 6,000 psi pressure rating @ 200 °F
- Features a replaceable Delrin® seat, and straight through porting for
bidirectional, high capacity flow and easy roddable cleaning - Blow-out proof stem provides a secondary stem seal in the full
open position - FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- All stems are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below
the bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems
- Non-rotating stem tip standard on isolation valves
ORDERING INFORMATION
| SERIES | 3 | 3-valve | ||||
| SEAT | 5 | Soft seat, 0.375″ orifice | ||||
| PROCESS TYPE | 1 | Differential pressure | ||||
| CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
| VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female, Stainless Steel | MMC | Flange-Flange, Steel |
| FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:
ORDERING INFORMATION – Additional Options
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Kalrez® 3018 or equivalent) | NB1 | NBR | ||
| HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic | HL5 | 1-3/4″ Phenolic |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL8) and
equalizing “T” handles (HL2).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 3510-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.
Description
3510 Series 3-Valve Differential Pressure Manifold Valves
Soft Seat (0.375″ Orifice)
3510 Series 3-Valve Differential Pressure Manifold Valves
Soft Seat (0.375″ Orifice)
- Designed for use with differential pressure transmitters incorporating
two isolation valves and an equalizing valve in differential pressure
measurement - Available in block, single flange, or double flange connection for remote
or direct installation - 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
and reliability - Soft seat design has 6,000 psi pressure rating @ 200 °F
- Features a replaceable Delrin® seat, and straight through porting for
bidirectional, high capacity flow and easy roddable cleaning - Blow-out proof stem provides a secondary stem seal in the full
open position - FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- All stems are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below
the bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems
- Non-rotating stem tip standard on isolation valves
ORDERING INFORMATION
| SERIES | 3 | 3-valve | ||||
| SEAT | 5 | Soft seat, 0.375″ orifice | ||||
| PROCESS TYPE | 1 | Differential pressure | ||||
| CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
| VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female, Stainless Steel | MMC | Flange-Flange, Steel |
| FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:
ORDERING INFORMATION – Additional Options
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Kalrez® 3018 or equivalent) | NB1 | NBR | ||
| HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic | HL5 | 1-3/4″ Phenolic |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL8) and
equalizing “T” handles (HL2).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 3510-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.
Reviews
There are no reviews yet.