All products-33%
Noshok 5530-FFC-FP 1/2 NPT - 1/2 NPT Steel Soft Seat Flare Pattern Manifold 5 Natural Gas Manifold Valve,
Original price was: $365.16.$259.50Current price is: $259.50.
NOSHOK 5530-FFS Soft Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS 5 Valve Natural Gas Manifold Valve
Original price was: $351.76.$237.82Current price is: $237.82.
NOSHOK 5530-FFS Soft Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS Valve Natural Gas Manifold Valve
Original price was: $540.50.$361.20Current price is: $361.20.
10
People watching this product now!
NOSHOK 5530-FFS Soft Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS Valve Natural Gas Manifold Valve
5530 Series 5-Valve Natural Gas Manifold Valves, Soft Seat/Tip (0.375″ Orifice)
 |
 |
 |
- Designed for use with differential pressure transmitters incorporating two
isolation valves, two equalizing valves and a vent valve in natural gas
applications - Flare Pattern™ valve configuration provides maximum clearance for
fingers during operation - Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
back-up metal-to-metal seal (U.S. Patent 6,820,857) - Non-rotating stem tip standard on large bore shut-off valves
- Available in block, single flange, or double flange connection for remote or
direct installation - 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- Soft seat design has 6,000 psi pressure rating @ 200 °F
- Features a replaceable Delrin® seat, and straight through porting for
bidirectional, high capacity flow and easy roddable cleaning on the
block valves - Blow-out proof stem provides a secondary stem seal in the full
open position - FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- All stems are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the
bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems
- Non-rotating stem tip standard on isolation valves
ORDERING INFORMATION
| SERIES | 5 | 5-valve | ||||
| SEAT | 5 | Soft seat/tip 0.375″ orifice | ||||
| PROCESS TYPE | 3 | Natural gas flow | ||||
| CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
| VALVE TYPE | MFC | Flange-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
| FFC | Female-Female, Steel | MMC | Flange-Flange, Steel | MMAS* | Flange-Flange 90° Angle, Stainless Steel | |
| MFS | Flange-Female, Stainless Steel | MMAC* | Flange-Flange 90° Angle, Steel | MMS | Flange-Flange, Stainless Steel |
* Only available in Flare Pattern™ configuration.
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:
ORDERING INFORMATION – Additional Options
| BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Kalrez® 3018 or equivalent) | NB1 | NBR | ||
| HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves si FKM and the standard handles are isolation “T” handles (HL8) and equalizing/vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 5530-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.
Description
NOSHOK 5530-FFS Soft Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS Valve Natural Gas Manifold Valve
5530 Series 5-Valve Natural Gas Manifold Valves, Soft Seat/Tip (0.375″ Orifice)
|
|
|
- Designed for use with differential pressure transmitters incorporating two
isolation valves, two equalizing valves and a vent valve in natural gas
applications - Flare Pattern™ valve configuration provides maximum clearance for
fingers during operation - Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
back-up metal-to-metal seal (U.S. Patent 6,820,857) - Non-rotating stem tip standard on large bore shut-off valves
- Available in block, single flange, or double flange connection for remote or
direct installation - 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- Soft seat design has 6,000 psi pressure rating @ 200 °F
- Features a replaceable Delrin® seat, and straight through porting for
bidirectional, high capacity flow and easy roddable cleaning on the
block valves - Blow-out proof stem provides a secondary stem seal in the full
open position - FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- All stems are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the
bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems
- Non-rotating stem tip standard on isolation valves
ORDERING INFORMATION
| SERIES | 5 | 5-valve | ||||
| SEAT | 5 | Soft seat/tip 0.375″ orifice | ||||
| PROCESS TYPE | 3 | Natural gas flow | ||||
| CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
| VALVE TYPE | MFC | Flange-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
| FFC | Female-Female, Steel | MMC | Flange-Flange, Steel | MMAS* | Flange-Flange 90° Angle, Stainless Steel | |
| MFS | Flange-Female, Stainless Steel | MMAC* | Flange-Flange 90° Angle, Steel | MMS | Flange-Flange, Stainless Steel |
* Only available in Flare Pattern™ configuration.
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:
ORDERING INFORMATION – Additional Options
| BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Kalrez® 3018 or equivalent) | NB1 | NBR | ||
| HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves si FKM and the standard handles are isolation “T” handles (HL8) and equalizing/vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 5530-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.
Reviews
There are no reviews yet.