All products-48%
NOSHOK 702-MFC 1/4 NPT, Male x Female, Steel, Soft Seat Block & Bleed Valve
Original price was: $114.95.$57.90Current price is: $57.90.
NOSHOK 704-FFC 1/2 NPT, Female x Female, Steel, Soft Seat Block & Bleed Valve
Original price was: $112.05.$59.99Current price is: $59.99.
Noshok 702-MFC-EM1 1/4 NPT, Male x Female, Steel, EPDM O-Ring, Soft Seat Block & Bleed Valve
Original price was: $112.70.$58.60Current price is: $58.60.
16
People watching this product now!
Noshok 702-MFC-EM1 1/4 NPT, Male x Female, Steel, EPDM O-Ring, Soft Seat Block & Bleed Valve
- Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 6,000 psi pressure rating @ 200 °F
- Replaceable Acetal seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- PCTFE or PEEK soft seat optional
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
- All stems are 316 Stainless Steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust cap for bonnet and stem (non-packing)
- 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw
Description
Noshok 702-MFC-EM1 1/4 NPT, Male x Female, Steel, EPDM O-Ring, Soft Seat Block & Bleed Valve
- Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 6,000 psi pressure rating @ 200 °F
- Replaceable Acetal seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- PCTFE or PEEK soft seat optional
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
- All stems are 316 Stainless Steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust cap for bonnet and stem (non-packing)
- 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw
Reviews
There are no reviews yet.