Noshok CR-12 1.5 Tri-Clamp Sanitary Clamps and Gaskets Original price was: $120.56.Current price is: $90.20.
Back to products
Noshok FA-2-4P 4-Pin M 12X1 Mating Conn F Angle X Cable Original price was: $57.05.Current price is: $48.50.
-12%
Click to enlarge

NOSHOK DK2 Gasket with Dielectric Shim, Steel

Part Number: DK2 Tag:

Original price was: $79.23.Current price is: $69.99.

Add to wishlist
Compare
14 People watching this product now!

NOSHOK DK2 Gasket with Dielectric Shim, Steel

Dielectric Kit

Dielectric kits are designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection. Dielectric kits provide a non-conductive barrier between the process piping and the instrument and isolate components from the effects of electrical current. By eliminating metal-to-metal contact, current is halted to prevent corrosion and aid in the cathodic protection of the system.

  • DK1
    • Single piece design combining a Delrin® sealing gasket and Delrin® dielectric shim
    • Bolts, washers and dielectric bushings are included with the kits
    • Cannot be used in conjunction with seal rings or o-rings
    • Seal rings or o-rings not required
  • DK2
    • Used as an alternative to a one piece design when a separate sealing gasket or o-ring is required
    • Two piece design consisting of a PTFE sealing gasket and PVC dielectric shim
    • Bolts, washers and dielectric bushings are included with the kits
  • Specifications:
    • Material: Delrin®, PVC
    • Max operating temp 150 °F
    • Dielectric strength exceeds 1/32 air arc gap approximately 2,500 Vdc
 
[Top of Page]

 

Futbols

50FA1 Series

Futbols (flange adapters) bolt to the process side of a flange-flange manifold to allow connection of process flange taps or process root valves. Futbols also allow flanges to be connected to threaded process piping while maintaining the ease of removal or repair of the manifold if maintenance is required. The futbols provide a 1/16″ offset connection from the bolt holes to give connection centers of 2″, 2-1/8″ or 2-1/4″.

  • Specifications:
    • Material: zinc-nickel plated steel, 316 stainless steel
    • Connections: 1/2″ NPT
    • Kit Includes : (2) Futbols, (4) hex bolts 7/16″-20, (2) PTFE face seals
    • Weight approximately 2.1 lb.
 
[Top of Page]

 

Manifold Mounting Kit

The manifold mounting kit is designed for direct or remote mounting to a two inch pipe stand. It can be used with any NOSHOK 2, 3 or 5-valve manifold by mounting a steel or stainless steel bracket directly to the manifold body.
 
[Top of Page]

Flare Patternâ„¢

The Flare Patternâ„¢ valve configuration is an available option on our 5030/5130 and 5530 Series 5-valve natural gas manifold valves. The equalization valves and vent valve on these manifolds are angled to provide maximum clearance for fingers during operation.
 
[Top of Page]

 

Δ Pressure To Static Plate

Used on gas pipelines, the differential pressure to static adaptor plate is used to mount a differential pressure transmitter and a static pressure transmitter to a five valve flange-flange manifold. They are available in zinc-nickel plated steel, electropolished stainless steel. An integral mini style bleed valve is incorporated in the plate and a 1/4″ NPT vent plug is provided. The mini style bleed valve is equipped with a FKM o-ring and PTFE back-up ring below the stem threads to protect against corrosion and galling. Stem threads are rolled for greater strength and ease of operation and all NOSHOK valves are 100% helium leak tested for guaranteed reliability. Maximum pressure rating of 10,000 psi for steel & stainless models.
See dimensions / Print dimensions
[Top of Page]

 

Δ Pressure To Δ Pressure Adaptor

NOSHOK differential pressure to differential pressure adaptors allow two differential pressure transmitters to be mounted on a single set of orifice taps. This configuration is ideal for applications such as bi-directional flow, and custody transfer where only a single set of orifice taps is available. Multiple adaptors are available for various application configurations and space restrictions.
 
 

Reviews

There are no reviews yet.

Be the first to review “NOSHOK DK2 Gasket with Dielectric Shim, Steel”

Your email address will not be published. Required fields are marked *

Description

NOSHOK DK2 Gasket with Dielectric Shim, Steel

Dielectric Kit

Dielectric kits are designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection. Dielectric kits provide a non-conductive barrier between the process piping and the instrument and isolate components from the effects of electrical current. By eliminating metal-to-metal contact, current is halted to prevent corrosion and aid in the cathodic protection of the system.

  • DK1
    • Single piece design combining a Delrin® sealing gasket and Delrin® dielectric shim
    • Bolts, washers and dielectric bushings are included with the kits
    • Cannot be used in conjunction with seal rings or o-rings
    • Seal rings or o-rings not required
  • DK2
    • Used as an alternative to a one piece design when a separate sealing gasket or o-ring is required
    • Two piece design consisting of a PTFE sealing gasket and PVC dielectric shim
    • Bolts, washers and dielectric bushings are included with the kits
  • Specifications:
    • Material: Delrin®, PVC
    • Max operating temp 150 °F
    • Dielectric strength exceeds 1/32 air arc gap approximately 2,500 Vdc
 
[Top of Page]

 

Futbols

50FA1 Series

Futbols (flange adapters) bolt to the process side of a flange-flange manifold to allow connection of process flange taps or process root valves. Futbols also allow flanges to be connected to threaded process piping while maintaining the ease of removal or repair of the manifold if maintenance is required. The futbols provide a 1/16″ offset connection from the bolt holes to give connection centers of 2″, 2-1/8″ or 2-1/4″.

  • Specifications:
    • Material: zinc-nickel plated steel, 316 stainless steel
    • Connections: 1/2″ NPT
    • Kit Includes : (2) Futbols, (4) hex bolts 7/16″-20, (2) PTFE face seals
    • Weight approximately 2.1 lb.
 
[Top of Page]

 

Manifold Mounting Kit

The manifold mounting kit is designed for direct or remote mounting to a two inch pipe stand. It can be used with any NOSHOK 2, 3 or 5-valve manifold by mounting a steel or stainless steel bracket directly to the manifold body.
 
[Top of Page]

Flare Patternâ„¢

The Flare Patternâ„¢ valve configuration is an available option on our 5030/5130 and 5530 Series 5-valve natural gas manifold valves. The equalization valves and vent valve on these manifolds are angled to provide maximum clearance for fingers during operation.
 
[Top of Page]

 

Δ Pressure To Static Plate

Used on gas pipelines, the differential pressure to static adaptor plate is used to mount a differential pressure transmitter and a static pressure transmitter to a five valve flange-flange manifold. They are available in zinc-nickel plated steel, electropolished stainless steel. An integral mini style bleed valve is incorporated in the plate and a 1/4″ NPT vent plug is provided. The mini style bleed valve is equipped with a FKM o-ring and PTFE back-up ring below the stem threads to protect against corrosion and galling. Stem threads are rolled for greater strength and ease of operation and all NOSHOK valves are 100% helium leak tested for guaranteed reliability. Maximum pressure rating of 10,000 psi for steel & stainless models.
See dimensions / Print dimensions
[Top of Page]

 

Δ Pressure To Δ Pressure Adaptor

NOSHOK differential pressure to differential pressure adaptors allow two differential pressure transmitters to be mounted on a single set of orifice taps. This configuration is ideal for applications such as bi-directional flow, and custody transfer where only a single set of orifice taps is available. Multiple adaptors are available for various application configurations and space restrictions.